Crower Lifters

Anyone using Crower Lifters ? or the Cam FX ones , I don't know anyone using them, any thoughts ?
Thanks
Wayne

 

I have crowers in my SBC.

 

Anyone using them in a blown alky hemi ?

 

Running Cam FX lifters in customers motors. They are rebuildable, best lifter on the market today. Using them in blown alcohol motors.

 

We use them in Mike Stawicki's pro mod. 65 runs last season and they stayed perfect. Nice pieces.

 

I run an alcohol dragster here in australia,its a 471ci BAE block with NRE fatehads and a psi d we turn it to 10500 all the time, i use the cam fx 1" lifters they are great, i was using other brands before and they didnt last anywhere near as long, they hold there shape and dont spread at the bottom like other brands also they are rebuildable, we also are using his new rocker system aswell which is pretty neat.

 

Sounds good , I'm waiting for a price on the Cam FX lifters, my set up is a 526 KB , with Dart/Total Flow twin plugs, 14-71 etc, 904" lifters 1.8"spacing, and i'm not planning on reving it that high (have you seen what it's in ?ha ha) probably 9000 max, but i want good parts in it that will last, due to customer cars etc i'll only do around 3 events a year ,just want to turn up and go fast in a commercial vehicle
Thanks for your help !
Wayne

 

cam fx lifter ??

Could you tell me the manufacturer of the " cam FX lifters " that you folks are referencing to.
Thanks Doug C

 

I've been searching too. Still can't seem to come up with a supplier name or site.

 

I stock the Cam FX lifters for the hemi, and I'll be happy to give out Chris' phone number. I'm at home now, and don't have the number here,but call me at the shop 626 815-8815 9 to 5 M-F PST.

I'll try to edit this later with the number.

 

I stock the Cam FX liferts for the hemi, and you can call Chris at 818 961-0318 with any tech questions.

Thanks, Robert Reehl

 

Chris from Cam FX PM'd me last week and i gave him a call earlier this week,
Helpfull guy that has faith in his product, will probably order a set as they sound good, Just got to get some more $$s together as they cost more than Crane etc but sound as though they last a lot longer and are rebuildable,
Chris also mentioned that they do their own rocker assys too

 

Any more insight on CAM FX lifters? What lifter does everyone prefer in a hemi motor?

 

crower had a problem a while ago with lifters failing i wouldnt use them,
this cam FX is interesting, now we're on jessel dog bone in my brad but jessel now make a standard type lifter for the hemi

 

Can't go wrong with the Cam Effects.

Don't forget, I have them in stock!

626 815-8815.

 

I know a few guys had bad luck with Crower lifters , maybe it was a bad production run ?

 

fontana lifters

does cam fx make lifters for a fontana , they call them hi lo lifters?

 

We had cam fx lifters come apart on more than 1 instance. Went to Jesel and will never look back at chris's junk. I have to tell you i dont come on hear to bash people but he was not helpful in the least. He is very hard to get ahold of then gives you the dang run around, oh took forever to get are damn lifters to. Called jesel and had them in 2 days. The jesel is much better in ever aspect . We broke a few axle pins on the cam fx, had the bodies of the lifter crack. Had a few axle shafts that were cracked wear he installs the roll pin because there ir not enough material on the end on the axle pin jesels axle pin is radius thus leaving even material around the roll pin. much better enginerring and parts availabel then with chirs junk in my opinion. I can tell you I race with a lot of hemi alky guys and i may be the only one talking but others have had the same issues i have had.

 

Cam Effects makes lifters for the Fontana, I think Miner sells them.

Once , when they were out of them, they had me send the hemi .904 lifters out for them.

Pro Mod 83, if you are going to call out a mans parts like that, at least sign your full name.

 

Any time!

Billy thompson