Floater disc's

Discussion in 'PSI Superchargers Tech Questions' started by DCobeen, Dec 25, 2023.

  1. DCobeen

    DCobeen Member

    Joined:
    Sep 17, 2006
    Messages:
    55
    Likes Received:
    0
    Resurfacing floater disks would like to know the depth of the 1/4" discharge slots on a new floater ?
    Mahalo Doug
     
    #1
    DCobeen, Dec 25, 2023
  2. Nitro Madness

    Nitro Madness Super Comp

    Joined:
    Sep 14, 2003
    Messages:
    360
    Likes Received:
    10
    It's all over the place....different floater manufacturers have their own specs and they can also be ordered with various number of cutter grooves and depths...seems the .350" thick floaters from Crower have .060" deep grooves - the .400 thick floaters might be .075" deep....but again - they can be ordered any depth the customer specifies...
     
    #2
    Nitro Madness, Dec 28, 2023
  3. DCobeen

    DCobeen Member

    Joined:
    Sep 17, 2006
    Messages:
    55
    Likes Received:
    0
    Mahalo, Scott ?
     
    #3
    DCobeen, Dec 28, 2023
  4. Nitro Madness

    Nitro Madness Super Comp

    Joined:
    Sep 14, 2003
    Messages:
    360
    Likes Received:
    10
    Yup - hope this helps
     
    #4
    Nitro Madness, Dec 29, 2023

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM