MBR black Friday sale!

Engine and Ignition Parts

· (1) Keith Black wet sump oil pump – good shape; works great. -16AN inlet x -12AN out to filter and -12AN return from filter). Includes extra spring and seals – used = $400

· (1) Moroso wet sump dragster oil pan w/ pickup and -16 fitting – used = $350

· (1) 90 degree TDC pickup – used = $75

· (2) 7” RCD timing degree rings – used = $75 ea

· (20) Speed-Pro 142M upper main bearings (1,2,4,5 – no thrusts) – NEW = $50

· (16) PSI #DR 1260ML triple valve springs (only used for dyno break in) = $300

· (16) Manley NexTek #221449E-16 triple valve springs (only used for dyno break in) = $300

· (31) PAC-1350 triple valve springs (inner spring removed – still test above 400 lbs @ 2.100” installed) – used = $400

· (16) used and (20) new PAC-C206 spring cups = $100

· (1) crank mount starter jaw – used = $30

· (1) L9 crank bolt ¾”-16 x 2” under head w/ ½” washer – used = $20

· Spark plug indexing washers (various thicknesses) – NEW = $5

· (4) RCD removable starter plate stand off’s 2.750” OAL – used = $25

· (1) fuel manifold with (2) -12 ports, (3) -8 ports, and (1) -10 port w/ mounting bracket – used = $50

· -6AN poppet spring x 1pc and shims (.040”) x 9 pcs and (.020”) x 10 pcs = $5

· (1) complete set of RCD front cover hardware studs and nuts for TFX block – used = $10

· (11) 5/16”-24 x .550” cam gear to hub bolts – used = $20

· (4) 7/16” cylinder head dowels x 1.250” OAL – used = $10

· (2) .070” x 4.375” Hussey Copper head gaskets – used = $40

· (2) .075” x 4.375” Hussey Copper head gaskets – used = $40

· (2) .090” x 4.375” Flat Out head gaskets – used = $40

· (2) pairs Hussey Copper header EXHAUST gaskets for BAE fat heads .070” copper – NEW = $20 / set

· (1) pair new and (1) pair used for 1 pass Hussey Copper header EXHAUST gaskets for AJPE fat heads .070” copper – new set = $20 & used set = $10

· (2) pairs Flat Out header EXHAUST gaskets for AJPE fat heads steel clad composite – NEW = $20 / set

· (1) pair Clark header EXHAUST gaskets for BAE fat heads steel clad composite – NEW = $20


Clutch and drive train parts

· (9) 7/16”-20 x 2-1/8” bell housing studs – used = $50

· (5) steel clutch stand barrels for 5/8” stud (1” course pitch x 1-1/4” OD x 3.320” OAL) – used = $40

· (5) titanium clutch stand bases for 5/8” stud (1” fine pitch x 1.100” OAL) – used = $40

· (8) Crower ½”-20 x 1” flywheel bolts and washers – used = $25

· (5) ARP 9/16” x 6-1/8” OAL flywheel studs – NEW = $75

· (1) 3/8”-24 x 2.340” OAL stall spring stud – used = $5

· (4) 3/8”-24 x 2.450” OAL stall spring studs – NEW = $30

· (6) 3/8”-24 x 2.450” OAL stall spring studs – used = $20

· (5) 3/8”-24 x 2.600” OAL stall spring studs – used = $18

· (6) .250”R x .375” thick clutch levers used (useable, but need radius polished) = $60

· (2) .281”R x .375 thick short clutch levers (used – in great shape) = $30

· (1) complete internal bell housing assembly of candlestick (will accept 1-7/8” input shaft), fork, cross shaft, and throw out bearing. Previously used in 8-5/8” bell housing – used = $100

· (10) aluminum lug spacers (1.250” OD x .695” ID x 1.125” OAL) – used = $10

· (9) steel lug spacers (1.250” OD x .695” ID x .175” OAL) – used = $5

· (10) steel (5/8” fine thread) flanged lug nuts – used = $10

· (5) steel (1/2” fine thread) shoulder (.680” OD x .550” OAL) lug nuts – used = $5


Tools

· (1) vacuum testing plate for checking INT and EXH = $5

· (1) feeler gage holder for hot and cold valve lash = $10

· (1) braided stainless steel hose PTFE lined for CO2 transfer 3600 MAWP x 48” = $25

· (1) set of short block engine lifting bars = $50

· (1) Pit Pal drum pump holder – NEW = $15

· (1) Pit pal (4) position 10oz CO2 bottle holder rack = $25

· (1) Pit Pal 4’ vinyl strip holder for door (only holder; no vinyl) = $10

· (3) CO2 bottle o-ring seals # CTN-PC2000 – NEW = $10

· (1) complete set of ProJacks for dragster: front and rear jacks, hydraulic line, and turbo Enerpac air/hydraulic pump. Front jack width = 9-3/4”, Rear jack width = 15-1/4”. Measurements to centerline when elevated: Front height = 13-1/8”, Rear height = 14-1/16” – used = $1,250


Safety

· (1) Simpson black parachute bag – used = $25


Towing

· (1) Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball – used = $50


Buyer responsible for shipping from 43080. Please call or text 330-936-1101 with questions. Pictures available by request.

 

this still for sale?