MBR Miner Bros Racing Engine, Heads, B&J Transmission....

Discussion in 'Noonan Classifieds' started by Timo, Oct 23, 2018.

  1. Timo

    Timo Member

    Joined:
    Jan 5, 2004
    Messages:
    79
    Likes Received:
    0
    MBR Miner Bros Engine 471 cui for sale
    Complete Intake Manifold to Pan MBR Engine
    Billet Block
    Billet MBR Heads
    MBR Magnesium Intake Manifold
    Magnesium Valve Covers
    MBR Rocker Arms
    Victory Titanium Valves
    New Pac Valve Springs
    Bryant Crankshaft 3.700"
    GRP Rods Brand New
    Arias Pistons Brand New
    Darton 4.500" Sleeves New
    Cam Effects Roller Lifters 4 Runs since new
    Erson Camshaft
    Barnes Oil Pump
    Dan Olson Oil Pan

    Engine ran 5,28 / 274 mph
    23.000 USD from Intake to Pan. Race ready
    Could also make less cui Inches . Have all the Parts to do it.


    MBR Cylinder Heads Complete
    2.600" Victory INT Valves Titanium
    1.950" Victory EXH Valves Titanium
    Victory Retainers & Locks
    PAC Springs
    4 Sets (8 pcs) available
    1 Set with 11 Runs - 5900 $ excellent condition
    1 Set with 16 Runs - 5700 $ excellent condition
    1 Set with 20 Runs - 5500 $ good condition
    1 Set with 35 Runs - 4000 $ have a welding job
    3 Sets were brand new 2 years ago and cost 9500$ per Set



    B&J 3 Speed Transmission complete with Taylor Blanket. 1.58 on First Gear. Tripple Sprags with Neutral. All in good condition and fresh.
    4.900 USD

    3 Complete Cygnus Datastar Data Logger Systems
    Every Data Logger comes with:
    Data Logger Computer in Carbon Fibre Box
    Engine RPM
    Clutch RPM
    Drive Shaft RPM
    Front Wheel RPM
    And more RPM's if needed
    Fuel Pressure
    Manifold Pressure
    Oil Pressure
    G-Meter
    Record Button
    Memory Card
    Download via USB cable from Card Box
    Cable for watching Live Data
    Full Cygnus Datastar Software and Program
    Extra Sensors Magnets and Memory Card

    One Data Logger System includes a throttle Position sensor, Manifold Temp, Ign Timing Module and wires for Flow Meter.
    1 Data Logger was 6,800.00 € New 6 Years ago. Every Data Logger is in perfect condition and working fine.
    1,500.00 USD / piece or 4,000.00 for all 3 Systems


    Dual Element Top Fuel / A-Fuel Rear Wing. Very nice Wing.
    1.800 USD

    Lanz 3 Hole Injector with all Lines, Nozzle Bodys Linkages and Barrel Valve. Including nice Carbon Fibre Scoop. With that combo we ran over a tenth quicker in ET to a normal Injector on Roots combo.
    1400 USD

    1 Set (8 pairs) CamFX .902 Roller Lifters with 5 Runs on it
    800 USD


    Pictures available

    Contact TIMO

    Email: info (at) werner-habermann-racing.com
     
    #1
  2. John Langley

    John Langley New Member

    Joined:
    Dec 26, 2018
    Messages:
    2
    Likes Received:
    0
    can you put some contact info on here !
     
    #2

Share This Page