Misc. Fuel Parts

All prices negotiable! have a lot of random parts we need to get out of the shop.
17-used coils 45ea these are checked and good to go.
1-8971 MSD Box 425
2-EM Air Regulator module 200ea

1-Mckinney Dragster loading dolly 750
3-dragster carbon nose cone 75ea

1-wilson fabricated A-fuel intake
1-wilson injector with large scoop
1-set Lamb 4 piston calipers pn 1602
1-PSI Mag T/F blower case very few runs 10 1/2" opening
2-Humme F/C fuel tanks
2-Mckinney F/C oil tanks
19-New ACE clutch discs 1 7/8" input
12-used ACE clutch discs 1 7/8" input all but one is at least .323 thick
2-K&N inline oil filters
2-large billet al. Fram oil filters with wrenches
2-long billet al. Fram oil filters with wrenches one does not have the filter element
1-XRP inline oil filters
4-canister style Fram oil filters with hard lines
4-cases of Lucas sure-shift ATF
5-cases of Lucas 85w-140 Gear oil
5-cases of Lucas 20w-50 break in oil
1-old style AFT accumulator
Shipping will be added!
lots of random decker valves, AFT jet holders, Normally closed valves (old school management stuff)
I'm open to package deals, if your looking for parts for top fuel or A-fuel I probably can get it!

Contact Chris @602-692-0613 or Anitrowarrior9@gmail.com

 

Is the loading dolly the part that pics up the front end or gets placed under the car by the foot box?

 

It gets placed under the foot box when loading the car into the trailer.

 

do you have any P&S style front spindles? I need one.
Jeff Johnsen

 

Would you send me a picture of the FC fuel and oil tank jackwright7140@gmail.com
Thank you,
Jack

 

what are the dimensions of the fuel tanks and the oil tanks?
Also how much. Interest in 1 fuel tank and 1 oil tank.

 

I do not have spindles.

 

They are standard out of a murf car, I'll take 600 for a set.

 

Sent

 

It's 22.5"deep, 18.5" tall the fuel tank is 12.5"wide the oil tank is 3 1/8 wide

 

Do you still have FC fuel/oil tanks?

Can you send me pics?
Hwhitlock@hitechcam1.com

Thanks