BAE, MSD, Racepak, Electrimotion, American Racing, Weld, Lamb, GRP

Used Chrisman 10.5 Complete Rear End with Strange Carbon Brakes 2.91 Gear & Spare 2.91 Gear Checked with No Cracks (Call for Price)

American Racing "Qualifier" Black Chrome Anglia Mount Dragster Wheels Used $500 for Pair

Leahy (Electrimotion) New 15v Long Large Battery, Switches, Cables, & Charger $450

Leahy (Electrimotion) New SB001 Safety Box with Air Solenoids, Receiver, Cables, Switches, & Air Cylinders, & PSI Shutdown Switch $600

Leahy (Electrimotion) 1 New Red Band Timer Box with Pressure Regulator, Harness, Pressure Transducer, & Pressure Activation Switch $1000

Leahy (Electrimotion) 2 Used Red Band Timer Boxes with Harnesses Only $325 Each

New Taylor Valve Cover Restraints $600

Track-Meter Used Like New $900

Altronics PerformAire Weather Station Trailer Based with Pager Used $1000

- BAE Used Blue Stand Rocker Assembly (Race Ready) Call

- 3 Used Casale & KB Cast Front Covers for BAE, Cam Cover, &a crank trigger wings (call)

- Racepak transducers used still good condition
Temp $80
60 psi $150
300 psi $150
(2) 600 psi $150each
750 psi $150

- Used Lamb 1602 Calipers with Carbon Pads like new ($1000 for the Set)

- New Taylor Spark Plug Wire Sets Direct Replacement for MSD Single & Dual Plug (PreCut With Boots & Ends & Can Use Old Plastics) Call

- New Scratch & Nitro Resistant Top Fuel Style Dragster Windshields 1/8" & 3/16" $595
- New Scratch & Nitro Resistant Old Style Dragster Windshield 1/8" & 3/16" $275

- (2) MSD #8158 6 Shooters Good Used $200 Each

- (2) MSD #8168 Retard Box Good Used $200

- Innovators West Damper Used Make Offer

- Hogan Short Deck A/F Manifold $800

- (2) Dunn Dual Mag Drive Used $500 Each

- USED BAE Billet Short Deck Block .904 Lifters 54 mm cam 4.310 Sleeves been Windowed & Repaired @ BAE $3000

-Used BAE billet big bore short deck block 1" lifters 60mm cam no sleeves or studs deck needs to be repaired. Call

- (15) 7/16” Single Taper 11.920 Long 5/16” Cup Push Rods Used $10 Each

- (9) 7/16” Single Taper 11.450 Long 5/16” Cup Push Rods Used $10 Each

- (15) 7/16” Single Taper 11.500 Long 5/16” Cup Push Rods Used $10 Each

- PAC valve springs #1360 New (45 Total) $550

- Manley #23677 Retainers New (16 Total) $250

- Manley #42335 Locators New (16 Total) $50

- GRP 6.830 A/F Billet Rods (8 new, 6 used) Call

- GRP 6.850 A/F Billet Rods New (8) Used (8) Call

- GRP 6.855 A/F Billet Rods New (8) Used (8) Call

- GRP 6.880 A/F Billet Rods New (8) Used (8) Call

- JE A/F Pistons 4.375 (1 run 8 Total) $200

- JE A/F Pistons 4.375 (used 10 total) $200

- Enderle Pumps (Used)
80A-1 7.1 Gallon $325
990 13.4 Gallon $375
1100 15.7 Gallon $500

- Settles 43 Gallon Fuel Pump with Inlet Line (make offer)

- Hadman/Chrisman rear end plates 4" offset $100 Pair
- Hadman/Chrisman rear end plates 6" offset $100 Pair
- Hadman/Chrisman rear end plates 6.5" offset $100 Pair

- Automan Clutch Cannon (Used) $1000

500 C.I.
JP1 Block
BAE Early Billet Fuel Heads Fresh (NEW Seats, Titanium Valves, Locks, Retainers, & Manley Springs)
(New) Black Duchellis Rocker assembly with Fuel Shafts, Stage V Roller Intake & Exhaust, 7/16 Adjusters
Bryant Crank
(New) BME Rods & Pistons
(New) Crane Cam
Crane Lifters
Dan Olson Dragster Pan
Billet Oil Pump
(New)Magnesium Manifold
SSI 1471 Hi-Helix Retro C Rotor with Blower Restraint
Enderle B&U Injector & K Valve
(New) Areomotive 17 Gallon Fuel Pump
Casale Front Drive
Pulleys from 27-45 Tooth 13-9 to 14 MM
Dunn Mag Drive (Fresh)
MSD 44 Mag, Points Box, Coil & Plug Wires
(New) 3 Coated Sets of Headers to go with it Different Sizes
$23000
*****(Motor Sold Complete Will Not Part Out)*****

****New & Used Chevy Engine Parts****

-Jomar stud girdles BBC used $200

-Smith Bros. push rods used $100

-Crower stainless steel roller rockers used $300

-1.7 Jesel Rocker Arms for 18 Degree Brodix, $1000




I have more specs on parts if needed also more parts coming.
Call or E-mail Chase or Clay
CopelandRaceCars@aol.com
940-395-4198 Call or Text

 

Do you still have any of the short deck blocks.7654385265

 

Yes still have them both.

 

How much for each and do you have studs and what kind of shape are they in

 

BME rods, please send spec's on rods.
JE A/F 4.375 pistons Spec's also, CH, coated, dome height, pin size, etc. pictures if available.
Mahalo, DCobeen cobeen@hawaii.rr.com

 

bump

 

ttt

 

TTT

 

ttt

 

Is the Ti clutch can a standard rear opening? For a candle stick?

 

Yes

 

Can you send pics of the rcd single mag drive and price to drew_sc5459@hotmail.com or text to 316-708-7166 thanks Andrew

 

Can you send a pic of the can? How much? mthomp392@yahoo.com

 

looking for rocker stands and shafts for aj 2 fuel heads front cover with bearing support TFX block and a intake

 

ttt

 

ttt

 

Ttt

 

how much for the 990 pump?

 

what will the 4.467 sleeves fit?

 

$375 Plus Shipping