Everybody's selling this stuff II

I have to clean out the shop, but everybody is selling this stuff, so here are the best prices you will find.

All parts are for BAE block and BAE 5 heads. All parts used unless noted. Prices do not include shipping.

Crane .904 lifters, spread bore & standard $100/set MIXED SETS STILL LEFT

1 spare BAE hi-ratio black rocker stand assembly (for one head), with Stage V 1.7 intake rockers, BAE hi ratio exhaust rockers, and Manton adjusters (5/16 ball) $1,200 Will separate.

Stage V 1.7 roller tip intake rockers, for adjuster oiling, 7/16 thread. 25 runs. No adjusters $550/set of 8

BAE hi ratio dual rib exhaust rocker, NEW $200

Donovan Engineering front gear drive $275

KB cast oil pump, dings in gear. $100

Darton ½” short sleeve, 4.375 bore. No more than .001 oversize. Fresh flex hone finish $35 ea.

Akerly & Childs NEW 4.380 rings. HTD dykes top, cast iron 2nd ring, hi tension oil ring. $150 full set. Misc 4.380 rings. Call

Wrist pins NEW 1.094 x 3.250 x .250 straight wall. Xtreme duty. Set of 8 $175.00

MSD 44 amp red coil, checked good $100

MSD 7455 cap adapt kit$25

Dan Olsen pan w/ expanded metal windage tray $300

Smiley’s dragster zoomie headers, welded to repair cracks $50 use for spares

Smiley’s dragster zoomie headers for BAE 8X heads, welded to repair cracks $50 use for spares

blanket for CS-1 transmission, No cert. $60.00

Victory 1 ti intake and exhaust valves for BAE 5 and 8X. good margin. $50 ea

SPE right angle blower starters, OLD. 1 has 12V windings a year ago, 1 has 24V windings. MAKE OFFER

Convo Pro dragster front wheels. Great condition. $200/pair

Weld 16x16, 5 x 5-1/2, 4 BS, rear wheels, for non-liners. NEW, one has never been out of the box. #788-616558. $700/pair

8mm bottom pulley, $100

8mm top pulley for PSI Screw blower , $75

Crane cam R296-500-16-48D $75

Bryant crank 3.850 std/std approx 50 runs. Will send to Marine Crank for check-up $1200


Tom Jones 908 251 1955
tom@tomjonesracing.com

 

Call Roger 905-531-5842 or email rjong0711@gmail.com

 

Hy Tom,
we sent you an e-mail

 

please send pics of front wheels fabshack@gmail.com thanks