Fuel Headed Hemi for sale, manifold to pan, unassembled for inspection, and 3 MSD 10s

Fuel Headed Hemi for sale, manifold to pan, will sell heads, intake separate

Here is an accurate description of the motor, unlike when I purchased it 3 years ago.

The Motor is a cast TFX 96 plus .100 block, 4.310 x 4.5 stroke, Veney fuel headed engine. I personally windowed the block (only repair) and it was professionally welded and machined. All 8 sleeves are fresh and fitted to the pistons. 2 cylinders are perfect 4.310, the other six are sized a little smaller as 6 of the 8 pistons skirts are a little tired and my machine shop guy said to run them another 10 runs and then he would advise all new pistons and hone the sleeves to match. The rings on the pistons are 6 run and need to be gapped for the new sleeves before assembly.

The crank is a 7 run Bryant that I purchased new from Bryant as well as new MGP rods (6 runs),

Keith Black oil pump (not cast, machined, produces 130 PSI at 2,000 idle, -20 line from wet sump pan 4 inches front 6 rear)

Magnesium intake, valve covers, timing gear cover, and pump extension.

Stage 5 intake rockers

Included are 3 used pistons that are in decent shape and new rings when you buy pistons for the motor.

The lifters are Morels 1.0 inch with double wheel exhaust lifter, I have a spare set that can be had for 400 dollars.

12,500 OBO, I will consider anything reasonable.


Also, selling 3 MSD 10 ignition systems, 2 10 plus, 1 older style with the double coil. 700 for 10 plus, 500 for 10 with 2 coils, they will be on Ebay as well (SOLD)

Cell is 502-608-0611 email, Iamaupspilot@aol.com

 

MSD 10 Pluses sold, great motor is still for sale!!!!

To the top!!!

This would be a great Top Sportsman, Top Dragster motor.

The cylinders are perfect for sorting out your tune with your blower, grabbing some pistons (I have all paperwork for engine for easy ordering), and then have a long career winning with a stout sportsman motor.

The only reason I am selling is I sold a street car right at the time a NRE X1 Blackhawk headed 521 came up for sale..... the stars aligned.

Iamaupspilot@aol.com

502-608-0611

 

Will separate, heads must go first

To the top!!!

I would be willing to sell heads separate.

Complete with mag intake for 100 tall block, mag valve covers, some spare rockers and spark plug tubes as well.

I'll make a smoking deal on these parts, and they are in incredible condition!!!

502-608-0611

 

Will separate!!!

To the top!!

 

Sold!!!

Sold, thanks ITA!!!!