MSD, RCD, Trick, Automan, BAE, Manton, Chrisman, RayFranks, Cam FX, many more parts

Parting out my A/fueller, and cleaning up the shop a bit.
I priced everything what I think is fair, but if I'm way out on something let me know.
I'll be heading to Tulsa for testing end of March (weather permitting, and to the Dallas points meet in mid-April if you want it delivered.
I'm working on a photo-bucket link w/ pictures of most everything, but that may take a day or two.
Until then, I can direct email you some pics.
Shipping is out of Lancaster, MN 56735
Best ph# during the day is 204-434-6801, or email direct at cbakx@tristarag.ca
I'll do my best to give you the most accurate info on the parts, to ensure you know what to expect, and I will take them back if your not happy.
Thanks for looking,
Clif Bakx

1) RacePack Pro II, c/w G meter,-10 & -12 flowmeters, oil pres, two fuel pres, two rpm (eng & diff), full dual mag timing w/ all pick-ups, two optic pickups, all egt sensors/junc boxes & wiring, new style reader, cartridge & software, EM timing & Rpm display module. No dash. All wiring incl’d. Two analog boxes. $7,800
3) CEBE Titt valve cover restraints, fresh w/ new recert, fits BAE fathead covers, all mount hrdwe. $1450
4) Automan dual mag kill sw kit w/ tether & clips $75
5) New style BDK, near new & test perfect, -10 in bottom & -10 out the side $500
6) EM 4 pole electric Air log w/ wiring for EM timer $250
10) EM power Module (larger battery & control) w/ charger $300
11) Set of 8 Morel 1” TF Llifters, dbl exh roller, fresh rebuilt at Morel via Motorsports Unlimited, $1250
13) 12 of Enderle -8 in & out brass poppits/checks, various psi, let me know your required psi $25 ea
14) 160 main jets, sizes from 30 to 160, not flowed, let me know what you need
15) 15 of Manton # 828 adjusters, new, 3/8 NF w/ 3/8 ball, hole-thru, $200
16) Ohaus Scout Pro Balance 400g scale, complete w/ accessories, & case $140
17) Fuel Inj Engineering Leak down test kit $120
18) Three rear CF wings, will sell only one of them. All Megara built. All dual element. All 18.5” mount. One is 72” that is pretty much brand new $4500. The other two are 60”, great shape, $3500 ea.
21) DJ Carbon fibre hemi engine ‘bucket’, no cracks, great shape, fresh w/ new SFI recert $800
22) one Olsen wet sump funny car pan (6.3” rear 5.5” front), used, has some minor windage tray damage, but no damage to rail or outside pan. $150 ea
23) 5 of BAE 5 fatheads, all configured for A/Fuel, but w/ plug-offs are perfect for blown Alky, fresh from BAE (still there, ready to ship), for 9/16” studs, & all good to go. $900 each. Can load up w/ all studs/springs/valves/retainers, etc & CC, for a ‘ready to run’ head.
24) RCD A/Fuel starter mount plate & stand offs, (crank start) w/ trigger mounts & TDC pointer $350
26) Two of NEW RCD p/n 202000-0060 trigger & TDC mounts, complete. $175 ea
29) RCD p/n 103507-04 Blower starter mount plate, New, $40
30) Cams: New A/F Bullet $400, 2 new Alky Crane $300 ea, email for cam cards
33) Cranks( dual key): new Billet Velasco 3.600, mounted in spare motor but never fired $3000 Used Bryant 3.600 billet crank, approx 40 runs, mag’d & polished, good-to-go, $2000
35) Rods: New set of 12 Brooks B2–35 TF 7.360 rods, $600; New set of 8 Brooks B2-35 TF 7.470 rods $400, Set of 8 Brooks 4-run B2-35 TF 7.450 rods; $250; set of 8 Venolia 8-run TF 7.445 rods $500
36) 12 BAE 4.375 std deck finish-honed sleeves, slightly used but re-honed & bore checked $40 ea
37) 16 of A-1 9/16”/9/16” x 7.220 long head studs, new still in plastic sleeve, for new style BAE std deck block w/ shallow holes $45 ea
38) 7/16” valley studs, for short deck .
40) One older RCD A/Fuel starter & Automan Battery pack, all working good. Offers
41) 16 single taper (1/2” upper, 7/16 lower) Manton Tool Steel pushrods, used for 6 runs then swapped valvetrains, so not needed, 11.862“overall, .200” deep 3/8 cup. All as good as new. $35 each
42) Lots of other misc push rods, various lengths & cups, let me know what you need. $10 each
43) Misc Crowerglide clutch parts, 4 different types of springs (new), large selection of counter weighs & studs, and more. Take a look & offer something fair.
44) Race Electronics Radio set, w/ mic, transmitter & one headset. $450
45) Inline Areomotive -12 fuel filter, rated for 600 psi/ 50 gpm, w/ element (used between pump & BV) $120
46) New CF replacement injector scoop for Automan Injector. $400
49) BAE internal down nozzle fuel rails for BAE 5, 6 & 8 heads, new, $50 ea
50) Automan offset fuel pump drives. Great for moving the pump out of the way for mounting the starter. C/w RCD gear drive cover. Great shape. $700
51) Used wet sump Olsen or Williams Oil pan, dragster style, used but good-to-go, $200
52) MSD #8993 Top Fuel Tester, used twice, still in box w/ all harness & instructions $200
53) MSD 8973 (New) ProMag Programmable controller,$300
54) One Lenco reverser, no neutral, for direct drive. Fine spline, 1 ¾ in & out. $500
56) New Taylor Lenco reverser blanket, bought 2 yrs ago, never installed, needs recert $ 100
57) 2 Sets of anodized Mag 44 handcuffs for dual mags, $75 /set
60) K-Line magnetic yoke crack detector, complete kit, pretty much brand new, $400
61) 66) 298” Uehara A/F roller, recently front halved, all sheet metal & helmut shroud w/padding, all cables/pedals/brake cyl & handle, seat & insert, chute handles & cables & chutes, fuel tank & lines, F + R engine plates, wing stand & braces, front axles & wheels/tires, diff not included but plates for 10.5 Chrisman. $5,000
67) Above, but with Chrisman 10.5” diff, 2.90 gears& axle that are perfect, complete w/ Lamb CF brakes (near new rotors & pads), spare re-surfaced .390” CF rotors, spare set of new CF pads. $15,000
68) Set of BBC Edelbrock Performer heads, #60459, complete, used to test 3 short blocks. $1500
69) Two Mighty Demon 750 Blower Carbs, used but good-to-go, $300 ea
70) Edelbrock BBC dual quad intake, w/ Edelbrock 4150 carbs, Billet air filter & linkage $800
71) Complete side window & window linkage set for 2 door 69-72 Nova. $200? offers
72) Factory 4-sp console for 66 Chevelle SS, great shape. $offers
73) Three pairs of Weld Draglites, all dual 5-bolt pattern (4” & 4.25”): Two of 12” x 15” w/ 5” back space & drilled/tapped for bead screws; Two of 10” x 15” w/ 3” back space & have a BF Goodrich T/A Drag Radials mounted on them; and Two of 6” x 15” w/ 3” back spacing w/ a pair of BF Goodrich T/A radials mounted on them. $800 for the works, or give me an offer for a set you need.
74) Hurst Competition Plus 4-spd shifter, new, but no linkage. $50

List updated as of Mar 18 (removed sold items and reduced some existing prices)
Clif
204-434-6801
cbakx@tristarag.ca

 

Parts

Can you text picture of item #58 to 410-808-4973 thanks

 

bench mount head holder

Love to, but sold it about 2 hrs after I posted the ad, along with a bunch of others.
I will update the list each evening
Clif

 

Clif did you get my email.

 

list

Clif , You have a PM

 

message

pm sent your way

 

Following is sold

RCD Batt pack
Head stand
Trick bell housing
weld wheels
EM shut down
EM batt & 4-log
one Lenco reverser
TTT engine handles
Hemi wires
-16 shut-off
Radio set
spring tester

Thanks!
Clif

 

More parts sold

One RCD starter
Block stud kit
Cam FX lifters
Gear drive
Cam gear
crank gears
new master kill sw
KB oil pump

Thank you!
Will update/edit complete list tomorrow
Clif

 

sold

RF Clutch machine also sold
chute tethers sold
Spring tester not sold (as stated), still available, goes 1000 lbs, great shape.
Please give me some offers on the rest!
Thanks,
Clif

 

Parts

Weld wheels 16 x 16 Bead locks
What stud pattern & back Space
Thanks

 

weld wheels

Both sets sold.
I will overhaul the parts list tonight, just waiting for a couple pending decisions.
Thanks,
Clif

 

list

Clif, you have a PM

 

List updated & pricing reduced

I have removed a bunch of parts that have sold, and sharpened up the price on the remaining.
Take a look, shoot me an offer.
Thanks!
Clif

 

brakes

would you sell the spare rotors and pads separate from the rear end? dan

 

rotors/pads

no, I won't sell them separate unless I sell the whole diff without them.
Thanks,
Clif