Blown 565 TD

Discussion in 'PSI Superchargers Tech Questions' started by Iceman64, Sep 6, 2014.

  1. Iceman64

    Iceman64 New Member

    Joined:
    Mar 15, 2014
    Messages:
    14
    Likes Received:
    0
    Looking for a few parts to finish project. BBC Zoomies, RCD or Milidon gear drive, Msd 20 Mag, I am hoping that someone has some good parts laying around. Thanks in advance
     
    #1
    Iceman64, Sep 6, 2014
  2. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,524
    Likes Received:
    3
    We have zoomies and Milodon Gear Drive, please send me your email so I can send pics
     
    #2
    SoDak, Sep 7, 2014
  3. Iceman64

    Iceman64 New Member

    Joined:
    Mar 15, 2014
    Messages:
    14
    Likes Received:
    0
    One down, two left. Mag and gear drive needed. Since I will be running the mag from the front of the engine, it does not need to have a stem. I can be contacted at 404-661-0978
    Thanks
     
    #3
    Iceman64, Sep 9, 2014
  4. Iceman64

    Iceman64 New Member

    Joined:
    Mar 15, 2014
    Messages:
    14
    Likes Received:
    0
    Two down,one left. MSD mag. 12 or 20. I can be reached at 1-404-661-0978
    Thanks
     
    #4
    Iceman64, Sep 10, 2014
  5. Joad Donnelly

    Joad Donnelly Member

    Joined:
    Jul 2, 2009
    Messages:
    84
    Likes Received:
    0
    Unless there are rules you are dealing with, I would recommend going with a 44 so you don't have to mess with upgrading later.

    Joad
     
    #5
    Joad Donnelly, Sep 10, 2014
  6. Iceman64

    Iceman64 New Member

    Joined:
    Mar 15, 2014
    Messages:
    14
    Likes Received:
    0
    Any input would be helpful on Mags. From the research I had done, it appears that a 12 or a 20 would suffice. Would I benefit by putting in a 44? If I would, that is the way I will go.
    Thanks
     
    #6
    Iceman64, Sep 10, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM