Hemi Hydraulic lifters

Discussion in 'PSI Superchargers Tech Questions' started by Mopar_man, Dec 21, 2011.

  1. Mopar_man

    Mopar_man New Member

    Joined:
    Jul 7, 2010
    Messages:
    51
    Likes Received:
    0
    Ok, its not for hard core racing but my street/strip build hemi 426 needs a set of hydraulic roller lifters. Standard hemi diameter.

    Who could recommend a brand of lifter they believe is a good performer..........
     
    #1
    Mopar_man, Dec 21, 2011
  2. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    Rhoads lifters
     
    #2
    john348, Dec 21, 2011
  3. Mopar_man

    Mopar_man New Member

    Joined:
    Jul 7, 2010
    Messages:
    51
    Likes Received:
    0
    In a world where most people say
    "you get what you pay for"
    to see a set of performance lifters for $350 a set is a little of a concern ????

    Maybe in this case it doesnt hold true ...................
     
    #3
    Mopar_man, Dec 21, 2011
  4. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    If money is not a concern then get jessels

    we used Rhoads years ago and loved them on the street
    good value
     
    #4
    john348, Dec 21, 2011
  5. 23T Hemmee

    23T Hemmee Member

    Joined:
    Jul 10, 2007
    Messages:
    449
    Likes Received:
    0
    Mopar,
    What are your cam specs? Intended RPM range? Spring pressure? Stock block, World, other? Stock lifter bores or bushed? More street use or strip? Jesels are Cadillacs for sure but may or not be overkill for what you're doing. It's a lot easier for someone else to spend "your" money.
     
    #5
    23T Hemmee, Dec 22, 2011
  6. Mopar_man

    Mopar_man New Member

    Joined:
    Jul 7, 2010
    Messages:
    51
    Likes Received:
    0
    Cam is only 246'@0.050 with 0.580 lift, Indy alloy block, unbushed lifter bores, mostly street. Still sorting out the springs. Cam is hyd roller.
     
    #6
    Mopar_man, Dec 23, 2011
  7. youngtuner

    youngtuner Member

    Joined:
    Mar 24, 2004
    Messages:
    956
    Likes Received:
    5
    Give me a call on the lifters and springs.
    978.423.5881
    Jonathan Pickett
     
    #7
    youngtuner, Dec 23, 2011
  8. 23T Hemmee

    23T Hemmee Member

    Joined:
    Jul 10, 2007
    Messages:
    449
    Likes Received:
    0
    #8
    23T Hemmee, Dec 24, 2011

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM