Bruno Air Cylinder Removal

So how in the heck do you get the transbrake cylinder off the main case of a Bruno? I've already loosened up the set screw so that's not it. I'm thinking there must be some O-rings in there holding it in but don't want to force it. It's Sunday so I can't call Bruno, anyone know how to get this out? Don't want to goof it up.


Tom

 

It's held on with a huge snap ring. The cylinder has a snap ring at each end.

 

Thanks Mike. Turns out the thing is screwed in but Bruno uses some good sealer so you just can't unscrew it easily. You do have to take it apart by the snap rings and pull each piece apart, three of those big snap rings have to come out. Then, on the last part that is screwed into the main case, it has a 1/4" - 20 hole to screw a bolt in to use as a handle to unscrew it. Thanks for the help.

Tom