Chute tethers

Discussion in 'Pit Buzz' started by john348, Apr 9, 2011.

  1. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    I received my tethers from Dennis today
    ok i am an idiot as i am not sure where these are supposed to attach
    gordy chassis with MW rear
    any one have pics on how it is done or info
    I checked Dennis's site but not much help there
     
    #1
    john348, Apr 9, 2011
  2. M Tigges

    M Tigges TAFC

    Joined:
    Jun 11, 2003
    Messages:
    644
    Likes Received:
    1
    One tab on each side of the rearend bolt
     
    #2
    M Tigges, Apr 9, 2011
  3. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    strap

    each strap must go thru both chutes and attach to the other side of the car,.
     
    #3
    Bill Naves, Apr 9, 2011
  4. KEITH CLARK

    KEITH CLARK Member

    Joined:
    Oct 13, 2004
    Messages:
    300
    Likes Received:
    1
    tethers

    John
    The teathers attch in an X patteren, attached to the top rear end mounting bolt on each side, droping down the back of the rear. They lace thru both chutes and attach to the lower rear end mounting bolts.
     
    #4
    KEITH CLARK, Apr 14, 2011
  5. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    keith they told me to attach them left to right and use the 2 top mounting bolts on each side..Dave
     
    #5
    secondwindracing, Apr 14, 2011
  6. KEITH CLARK

    KEITH CLARK Member

    Joined:
    Oct 13, 2004
    Messages:
    300
    Likes Received:
    1
    teathers

    Dave
    Justin showed me that method on Dennis' car, might depend on the chute mount design. Mounted side by side or one above/below
     
    #6
    KEITH CLARK, Apr 15, 2011

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM