EM timing monitor

Discussion in 'PSI Superchargers Tech Questions' started by Don Onimus, Aug 27, 2010.

  1. Don Onimus

    Don Onimus New Member

    Joined:
    Feb 28, 2009
    Messages:
    1,337
    Likes Received:
    0
    Not sure if I am doing this right, but set timing @ 24 deg. Set timing pick-up pick up @ 1 deg. before magnet.Down loaded and it is telling me the timing is 46.3 deg. do I divide it into 2 for timing? There is no way this thing has that much lead in it. Tried to call Dave, but got the same voice mail. Thanks Don

    Sorry, It was set @ TDC
     
    #1
    Last edited: Aug 27, 2010
    Don Onimus, Aug 27, 2010
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    It is very important that the TDC sensor to be right in front of a magnet with the motor set at TDC. So have you set the motor at TDC on the timing mark then set the pickup exactly opposite the magnet or did you do it at 24 degrees? May guess is that you did it at 24*. Did you set up the Racepac parameters exactly as specified? And NO you do not divide the answer by two.
     
    #2
    Last edited: Aug 27, 2010
    Mike Canter, Aug 27, 2010
  3. pop

    pop New Member

    Joined:
    Sep 12, 2003
    Messages:
    34
    Likes Received:
    0
    timing

    what did you say?
     
    #3
    pop, Aug 28, 2010
  4. Andy C

    Andy C Member

    Joined:
    Mar 25, 2006
    Messages:
    229
    Likes Received:
    3
    Got one the other week from EM workd AWESOME.
    Put the timing mak to 0 by your pointer and put the Em senor on any crank tiger magnet.
     
    #4
    Andy C, Aug 28, 2010
  5. pop

    pop New Member

    Joined:
    Sep 12, 2003
    Messages:
    34
    Likes Received:
    0
    timing

    whaaaaaaat?
     
    #5
    pop, Aug 29, 2010

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM