clutch finger heights?

Discussion in 'Pit Buzz' started by nmro2114, Mar 10, 2010.

  1. nmro2114

    nmro2114 Member

    Joined:
    Nov 25, 2005
    Messages:
    269
    Likes Received:
    0
    When setting clutch finger heights how much variance in height is OK? If they are within .010 is that alright. I am speaking of primary fingers on a fuel clutch.
     
    #1
    nmro2114, Mar 10, 2010
  2. T.Smith

    T.Smith Top Dragster

    Joined:
    May 22, 2003
    Messages:
    167
    Likes Received:
    0
    +.005 or -.005 is the most I'll live with.

    Are your idle buttons and radius buttons the same height?

    Are the pin holes in the primary levelers the same height?
     
    #2
    T.Smith, Mar 12, 2010
  3. nmro2114

    nmro2114 Member

    Joined:
    Nov 25, 2005
    Messages:
    269
    Likes Received:
    0
    The button height varies slightly . The pin holes are in good shape and correct size and height.
     
    #3
    nmro2114, Mar 12, 2010
  4. T.Smith

    T.Smith Top Dragster

    Joined:
    May 22, 2003
    Messages:
    167
    Likes Received:
    0
    Then make them the same and then see what you come up with on your primary lever heights.
     
    #4
    T.Smith, Mar 12, 2010

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM